The SABRENT HB-PU16 review comes down to a simple question: do you need a large bank of USB-A ports with individual power controls?
This 16-port USB 3.0 hub is built for workstations with numerous drives, readers, and peripherals to connect.
SABRENT HB-PU16 Review Summary
The quick verdict

1,000+ ratings
Read Amazon ReviewsSABRENT HB-PU16
A fit for desks that need many USB-A connections, individual port switches, and USB 3.0 data access in one powered hub.
- Sixteen USB 3.0 downstream ports for connecting compatible USB peripherals.
- Advertised data transfer speeds of up to 5Gbps.
- Backward compatibility with USB 2.0 and USB 1.1 devices.
- Individual power switches for managing ports.
Pros
- High port count suits a desk with many connected USB devices.
- Individual switches allow port-by-port power control.
Consider before buying
- Sixteen ports are likely more than needed for a small or travel-focused setup.
- The product information does not specify charging output for individual ports or explain how the 90W output is allocated.
Read the full review summary
The HB-PU16 combines sixteen downstream USB-A ports, per-port blue power-status LEDs, and compatibility with USB 3.0, USB 2.0, and USB 1.1 devices.
Its advertised data ceiling is up to 5Gbps, while older compatible devices can use their supported lower transmission speeds. Plug-and-play and hot-swappable operation are intended to make connecting devices straightforward.
It is most compelling for a fixed desk where port count and control matter more than compactness or a mixed assortment of connection types.
The description identifies external drives, flash drives, card readers, and other USB peripherals as possible connections, but does not give a per-port charging rating or explain how the 90W output is distributed.
Buyers who need power for multiple devices should check those details before relying on it as a charger.
The buying factors
SABRENT HB-PU16 Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Port capacity
Sixteen downstream ports can accommodate a large collection of USB devices from one hub.
USB generation support
USB 3.0 is supported alongside USB 2.0 and USB 1.1, allowing older devices to connect.
Data transfer potential
The stated maximum is up to 5Gbps; actual transfer rates depend on connected devices and setup.
Port-level visibility
A blue LED indicates power status for each port, making port states easier to inspect.
Port-level control
Individual power switches provide a way to manage ports separately.
Charging clarity
The product is described as a hub and charger with 90W high-power output, but port-level charging details are not specified.
Key Features and Specifications of SABRENT HB-PU16
- Sixteen USB 3.0 downstream ports for connecting compatible USB peripherals.
- Advertised data transfer speeds of up to 5Gbps.
- Backward compatibility with USB 2.0 and USB 1.1 devices.
- Individual power switches for managing ports.
- Blue LED indicators show power status for each port.
- Plug-and-play and hot-swappable operation.
- Designed for USB flash drives, card readers, external hard drives, and other peripherals, with 90W high-power output identified in the product name.
Pros and Cons of SABRENT HB-PU16
Pros
- High port count suits a desk with many connected USB devices.
- Individual switches allow port-by-port power control.
- Blue status LEDs make it easier to see which ports are powered.
- USB 3.0 support is paired with compatibility for USB 2.0 and 1.1 devices.
Consider before buying
- Sixteen ports are likely more than needed for a small or travel-focused setup.
- The product information does not specify charging output for individual ports or explain how the 90W output is allocated.
- It is a USB-A focused hub; check that your computer and peripherals have compatible connections.
Who Should Buy SABRENT HB-PU16?
Good fit
Consider the HB-PU16 if your workstation regularly needs connections for a mix of drives, card readers, and other USB peripherals.
Sixteen ports provide room to connect a broad group of devices, while individual switches and status LEDs give you more control and visibility than a simple passive port expander.
The up-to-5Gbps USB 3.0 ceiling is relevant for compatible storage and data accessories, and support for USB 2.0 and USB 1.1 helps accommodate older equipment.
Keep in mind that a device and its connection determine the practical transfer rate; the maximum does not mean every attached device will transfer at that speed.
Before choosing it for charging, confirm that the hub's per-port output suits the phones, tablets, or other devices you intend to power.
The 90W figure appears in the product name, but the supplied details do not show how that power is divided among ports.
Who should skip it
Skip this model if you only need a few ports or want a compact hub to carry with a laptop. Its sixteen-port layout is aimed at a more equipment-heavy setup.
Look elsewhere if your setup depends on USB-C ports or if you need a clearly specified charging output for each connected device. Confirm connector and power requirements before buying.
SABRENT HB-PU16 review: how its 16-port layout fits a workstation
Port count for a device-heavy desk
Sixteen downstream connections can reduce the need to rotate peripherals through a smaller hub.
That capacity is useful when several storage devices and accessories stay connected, although a buyer with only a keyboard, mouse, and occasional drive may not make much use of the extra ports.
Speed depends on the whole connection
The up-to-5Gbps figure describes the hub's USB 3.0 data capability, while USB 2.0 and USB 1.1 devices remain supported at their respective lower speeds.
The connected device and host setup also affect transfer results, so the maximum is best treated as a capability ceiling rather than a promise for every file copy.
Switches and indicators add practical control
A separate power switch and blue power-status LED for each port make it easier to manage a crowded set of connections.
This can be helpful when you want to control individual peripherals without unplugging them, though buyers should confirm that the switching arrangement matches how they plan to use their devices.
Treat the charging figure as a point to confirm
The HB-PU16 is presented as a hub and charger with 90W high-power output, but the provided details do not break that figure down by port or describe charging behavior across multiple devices.
If charging is a central requirement, compare the needed output for each device with the hub's complete power specifications before purchase.
Alternatives to SABRENT HB-PU16
One supplied alternative stands out as a useful comparison: it offers fewer data connections but gives clearer details about dedicated charging ports.
USB Hubs alternative

6,000+ ratings
Read Amazon ReviewsSABRENT HB-B7C3 10-Port USB 3.0 Hub
Choose the HB-PU16 when the larger count of USB 3.0 downstream ports is the priority. Consider the HB-B7C3 if you need fewer connections and prefer its explicitly described dedicated charging ports and included power adapter.
- The HB-B7C3 supports up to seven USB 3.0 devices at once and includes three dedicated charging ports rated up to 2.4A per port, a 60W power adapter, and individual switches and LEDs.
- The HB-PU16 offers sixteen USB 3.0 downstream ports, individual power switches, and per-port blue power-status indicators; its supplied details do not specify per-port charging output.
Is SABRENT HB-PU16 Worth It?
The SABRENT HB-PU16 is worth considering for a fixed workstation that needs many USB-A connections, USB 3.0 support, and individual port control.
Its sixteen ports and per-port indicators are its clearest strengths, especially when several drives and accessories stay connected.
Buy it if that capacity fits your setup and you have confirmed the charging details for your devices.
If you need fewer ports with specifically described charging outputs, the HB-B7C3 is a more clearly defined fit; for a small setup, the HB-PU16 may be excessive.
Your review at a glance

1,000+ ratings
Read Amazon ReviewsSABRENT HB-PU16
A fit for desks that need many USB-A connections, individual port switches, and USB 3.0 data access in one powered hub.
- Sixteen USB 3.0 downstream ports for connecting compatible USB peripherals.
- Advertised data transfer speeds of up to 5Gbps.
- Backward compatibility with USB 2.0 and USB 1.1 devices.
- Individual power switches for managing ports.